+38 097 889-80-10
+38 068 864-09-29
To quickly slice frozen meat is the main purpose of the chopper. Besides, this device can work with other food blocks like butter, chocolate, and cottage cheese. It`s used on lines for the wieners, sausages, pates, semi-finished meat products, and baby food productions. The temperature of the loaded products can range from -18 °C to -3 °C. In this case, the piece mass should not exceed 200 g.
The meat block flaker is easy to use and can be controlled by one operator.
The chopper is manufactured with the required technical standards and safety regulations. However, as with any other industrial equipment, extreme caution must be exercised with this device because dangerous situations, both to human life and health, directly affecting the proper operation of the machine itself may arise.
The device has a reliable housing in which the knife shaft is installed. In addition, there is an electric blade shaft motor inside, which is adjusted in height using tension bolts and nuts.
The motor on the rear wall is equipped with a casing. In addition to the powerful engine, the case contains a power cabinet covered by a folding control panel. The body is perfectly combined with the transportation tray for the products placed in the grinding section. The compartment is closed by the receiver thanks to the two handles used on the loading side of frozen blocks. It is equipped with a damper that automatically closes the window, thereby preventing emissions of the cut product.
There is a pressing device inside to prevent the effect of “block rebound” when the chopper is operating.
The equipment is also equipped with a hinged hatch, which simplifies washing the machine, re-sharpening, and replacing knives. This device is closed using two handles and, thanks to the locking module, prevents unexpected opening.
The body of the meat block flaker is covered with casings on both sides. It is equipped with four fixed supports for a stable position and height adjustment of the block flaker. The device also includes position sensors. They stop the machine operation if there is no trolley or the hatch and receiver are open.
